Beschreibung
Le Griddle Pro Series 105 Built-In Gas Griddle, 6mm Plate — OML105P6
This is the Pro Series 105 fitted with the heavy 6mm plate — the biggest and most thermally stable griddle Le Griddle builds for a cabinet. Across 40-5/8″ x 16″, or roughly 650 square inches, the extra plate mass means the surface temperature holds when a full load of cold food hits it.
That matters more the wider the griddle gets. On a 41-inch surface you are rarely cooking one thing — you are loading it. Three U-shape 304 stainless burners at 27,000 BTU total, each independently controlled, feed a plate that stays put under that load instead of dipping and recovering in waves.
The trade-off is patience: a 6mm plate takes longer to reach temperature and longer to change once it is there. High-volume cooks take that deal every time; if you want fast swings between settings, the 3mm OML105P3 is the more agile plate. Both share backlit control knobs that read at a glance — red for high, yellow for low, blue for off — plus halogen work lights and an LED brand projection, push & spark ignition, three thermocouple safety valves and a dishwasher-safe grease tray.
The cut-out is the same 40-1/2″ by 16-3/4″ by 5-3/4″ as the 3mm model, so the cabinetry decision does not lock you in. Natural gas or propane with orifices included, 110V for the lights. Add a GFFRAME105 trim kit, or a GFLINER105 from our insulating liners for combustible surrounds. See the whole range in our built-in griddles.
Key Features
- Heavy 6mm 304 stainless plate — maximum thermal stability under load
- 27,000 BTU from three U-shape 304 stainless steel burners
- 650 sq in cooking surface — 40-5/8″ x 16″
- Three independently controlled heat zones
- Holds temperature through full loads of cold food
- Backlit control knobs, halogen work lights and LED brand projection
- Push & spark ignition with three thermocouple safety valves
- Same 40-1/2″ cut-out as the 3mm OML105P3
- Natural gas or propane — conversion orifices included
- Made in the USA
Specifications
| Model | OML105P6 |
| Series | Pro Series |
| Fuel | Natural gas or propane (conversion orifices included) |
| Burners | 3 x U-shape 304 stainless steel, 9,000 BTU each |
| Total Output | 27,000 BTU |
| Cooking Surface | 40-5/8″ W x 16″ D (650 sq in) |
| Plate Thickness | 6mm |
| Cook Plate | 304 stainless steel over cast iron with an aluminum base plate |
| Housing | 304 Stainless Steel |
| Cut-Out Size | 40-1/2″ W x 16-3/4″ D x 5-3/4″ H |
| Gas Inlet | 3/8″ male flare |
| Power | 110V required (transformer included) |
| Use | Indoor, outdoor or commercial |
| Made In | USA |







